Refrigerators that have ice cream maker capability modules.

Kitchen tools and kitchen gadgets such as parers, forks, spatulas, cheese knives, cheese wire slicers, grapefruit knives, turners, mashers, ladles and basting spoons.

Control panel for arc welding power sources to facilitate gas welding.

Voltage adapters (to increase or decrease voltage), patch cord connector adaptors (required in the electronics industry), alarms and alarm systems (as found in industry or for the purpose of security signaling), public address amplifiers (mobile and fixed type as found in fire and police vehicles or used in stadiums and ball parks), antennas (of all types, mechanical or electronic), antenna rotators (to rotate an antenna), lightning arresters (to safely conduct lightning to ground), voltage and current attenuators (of the resistive or inductive type), baffles (covers affording protection to inner components), barrier and terminal blocks (as found in electronic terminating panels), belts (dial drive and motor drive), bezels (raised rim or border as found in electronic digital displays or electronic metering), parts or component bins (for component storage), printed circuit boards (electronic circuitry on a board), bolts, nuts, insulators, rivets, fasteners (as associated with the assembly of electronic components), books (of a nature conveying information, electronic, electric or mechanical), boxes, cabinets and enclosures (as used to house electronic, electrical or mechanical components), breadboard assemblies (as required for the proto typing of electronic circuitry), rectifier bridges (as used to rectify alternating current), bulbs and lamps (incandescent, gas discharge, neon etc.), buzzers (for signaling or alarming), cables (single or multiple, electronic conductors), capacitors (electronic and electrical), cases (for protection and transportation of electronic test equipment, tools or components), cells (as in solar cells, gas discharge or energy), chassis (as required for constructing or enclosing electronic, electrical or mechanical components), electronic chemicals (as required in the industry for cleaning, lubricating, insulating, cooling etc. of electronic, electrical and mechanical equipment), clamps and clips (for component assembly), coil assemblies (electronic pre-wound coils), connectors (as required for terminating single or multiple conductor cables), connector adapters (as required to adapt different component styles to make them compatible), controls (electronic, electrical or mechanical), converters (electronic devices used for converting one form of energy to another or one frequency to another), cords (to supply energy to an electric or electronic device), crystals (as required for the electronic generation of a stable signal), demagnetizers (as required in the electronics industry to reduce the noise level of static in video or audio reproduction), desoldering tools (used to remove electronic components without destroying the component), detectors (of the diode rectification type, or as required complete with associated circuitry for the detection of metal), dials (as used to indicate a relative volume level or frequency position), drills and accessories (electric or electronic drills and accessories as associated therewith), battery eliminators (a device required to produce or convert electrical energy), printed circuit etchants (as required in the chemical process for production of electronic printed circuits), fasteners (for securing electronic components), fault finders (of a diagnostic electronic or electrical nature), feedthrus (insulators), flashers (electronic pulsing devices), fuse clips (electric or electronic fuse holders), fuses (circuit protection devices), grilles (a cover over an electronic device allowing air circulation), grommets (rubber or plastic feedthru insulating devices), soldering guns (electronic or electric soldering tools), handsets (a transmitting/receiving device as used in a telephone), hardware (for mounting, repairing or assembling electric or electronic equipment), heat shrinkable tubing (insulation or protection for electronic or electrical wiring or connections), heat sinks (devices required for the safe conduction of heat away from temperature sensitive circuitry), public address horn speakers (for reproduction of sound at high levels), headphones (as used for monitoring aircraft radio, radio station operational monitoring, etc.), insulators (as required to divide components carrying energy at different levels), intercoms (for communication over reasonably short distances), inverters ( a device used to change direct current to alternating), jacks (a female electrical or electronic connector), electronic or electrical hobby kits (a package or components and instructions offering everything necessary for the user to construct a working model from the parts), knobs (as found in the electrical, electronic or mechanical trades), lacing cord (for supporting and neatly tying electronic or electrical wiring in place), lamp holders (for the support and electrical connection of all light producing devices), L.E.D.'S (light emitting diodes of the semi conductor family), lenses (a part of a lamp holder assembly to direct or diffuse light), lubricants (see chemicals - as related to the electronics industry), meter cases (electronic analog or digital meter enclosures or leather or plastic carrying cases), public address microphones (for major P.A. system applications), meters and test equipment (for function monitoring and testing in the electronic, electrical and mechanical trades), master antenna signal distribution systems (as required for the distribution of signals (TV - FM - AM - UHF) from one antenna interception point to multiple outlets as in a major hi-rise complex), megaphones (to reinforce audio distribution on a portable basis), public address systems (complete systems for such applications as forest fire fighting, auto racing etc.), phones (of the telephone or intercome variety), plug and jack sets (of a variety and physical configurations designed for interconnections of electronic equipment or test gear), binding posts (for the termination of electronic circuitry), potentiometers (controls of the carbon or resistive wire type), power supplies (any device supplying electrical energy either alternating or of the direct current nature), probes (instruments for interconnection or testing), patch cord (for interconnection of electrical of electronic equipment) printed circuits (complete electronic circuits etched chemically into a copper clad circuit board), regulators (for the regulation of current or voltage in a circuit), relays (electro mechanical switches), resistors (electronic devices required to control current flow in electronic circuits), screws (for electro mechanical mounting), shunts (as required in meter movements), sockets (to support electronic components such as a integrated circuits, etc.), solder (for the connecting of elements by the application of heat), soldering irons and accessories (as required in the electronic/electrical trade as tools of the trade), spacers (as required in the electronics trade), spaghetti (trade term for insulating tubing used on wire splices), splitters (for dividing incoming television signals for use at several outlets), strain reliefs (as required on power cord installations to protect cord from being torn from chassis), suppressors (for electronics noise suppression), switches and switch hardware (all types such as toggle, push button, mercury, printed circuit, dip and thermal), security systems (to include automotive home and industrial security systems of the hard wire type electrical eye type ultrasonic or RF transmission type), semiconductors (to include all families of semis such as diodes, integrated circuits, optical devices, field effect devices, LED devices, liquid crystal devices, etc.), insulating electrical tape (fabric and polyvinal types), terminals (for wire terminating), test equipment (as related to the electronics, electrical and mechanical industry), thermistors (temperature sensitive, resistive components), tie straps (for binding cable bundles), tools (to include all hand tools that would be found in the electrical, electronic or electro mechanical industry), transformers (of the wire wound variety as required in electrical/electronic circuitry), telephone accessories (to add or delete phones to an existing system cords, plugs, jacks, adaptors), wire (as found in the electrical/electronics industry).

Voltage adapters (to increase or decrease voltage); patch cord connector adaptors (required in the electronics industry); alarms and alarm systems (as found in industry or for the purpose of security signaling); public address amplifiers (mobile and fixed type as found in fire and police vehicles or used in stadiums and ball parks); antennas (of all types, mechanical or electronic); antenna rotators (to rotate an antenna); lightning arresters (to safely conduct lightning to ground); voltage and current attenuators (of the resistive or inductive type); baffles (covers affording protection to inner components); barrier and terminal blocks (as found in electonic terminating panels); belts (dial drive and motor drive); bezels (raised rim or border as found in electronic digital displays or electronic metering); parts or component bins (for component storage); printed circuit boards (electronic circuitry on a board); bolts, nuts, insulators, rivets, fasteners (as associated with the assembly of electronic components); books (of a nature conveying information, electronic, electric or mechanical); boxes, cabinets and enclosures (as used to house electronic, electrical or mechanical components); breadboard assemblies (as required for the proto typing of electronic circuitry); rectifier bridges (as used to rectify alternating current); bulbs and lamps (incandescent, gas discharge, neon etc.); buzzers (for signaling or alarming); cables (single or multiple, electronic conductors); capacitors (electronic and electrical); cases (for protection and transportation of electronic test equipment, tools or components); cells (as in solar cells, gas discharge or energy); chassis (as required for constructing or enclosing electronic, electrical or mechanical components); electronic chemicals (as required in the industry for cleaning, lubricating, insulating, cooling etc. of electronic, electrical and mechanical equipment); clamps and clips (for component assembly); coil assemblies (electronic pre-wound coils); connectors (as required for terminating single or multiple conductor cables); connector adapters (as required to adapt different component styles to make them compatible); controls (electronic, electrical or mechanical); converters (electronic devices used for converting one form of energy to another or one frequency to another); cords (to supply energy to an electric or electronic device); crystals (as required for the electronic generation of a stable signal); demagnetizers (as required in the electronics industry to reduce the noise level of static in video or audio reproduction); desoldering tools (used to remove electronic components without destroying the component); detectors (of the diode rectification type, or as required complete with associated circuitry for the detection of metal); dials (as used to indicate a relative volume level or frequency position); drills and accessories (electric or electronic drills and accessories as associated therewith); battery eliminators (a device required to produce or convert electrical energy); printed circuit etchants (as required in the chemical process for production of electronic printed circuits); fasteners (for securing electronic components); fault finders (of a diagnostic electronic or electrical nature); feedthrus (insulators; flashers (electronic pulsing devices); fuse clips (electric or electronic fuse holders); fuses (circuit protection devices); grilles (a cover over an electronic device allowing air circulation); grommets (rubber or plastic feedthru insulating devices); soldering guns (electronic or electric soldering tools); handsets (a transmitting/receiving device as used in a telephone); hardware (for mounting, repairing or assembling electric or electronic equipment); heat shrinkable tubing (insulation or protection for electronic or electrical wiring or connections); heat sinks (devices required for the safe conduction of heat away from temperature sensitive circuitry); public address horn speakers (for reproduction of sound at high levels); headphones (as used for monitoring aircraft radio, radio station operational monitoring, etc.); insulators (as required to divide components carrying energy at different levels); intercoms (for communication over reasonably short distances); inverters (a device used to change direct current to alternating); jacks (a female electrical or electronic connector); electronic or electrical hobby kits (a package or components and instructions offering everything necessary for the user to construct a working model from the parts); knobs (as found in the electrical, electronic or mechanical trades); lacing cord (for supporting and neatly tying electronic or electrical wiring in place); lamp holders (for the support and electrical connection of all light producing devices); L.E.D.'S (light emitting diodes of the semi conductor family); lenses (a part of a lamp holder assembly to direct or diffuse light); lubricants (see chemicals - as related to the electronics industry); meter cases (electronic analog or digital meter enclosures or leather or plastic carrying cases); public address microphones (for major P.A. system applications); meters and test equipment (for function monitoring and testing in the electronic, electrical and mechanical trades); masters antenna signal distribution systems (as required for the distribution of signals (TV - FM -AM - UHF) from one antenna interception point to multiple outlets as in a major hi-rise complex); megaphones (to reinforce audio distribution on a portable basis); public address systems (complete systems for such applications as forest fire fighting, auto racing etc); phones (of the telephone or intercome variety); plug and jack sets (of a variety and physical configurations designed for interconnections of electronic equipment or test gear); binding posts (for the termination of electronic circuitry); potentiometers (controls of the carbon or resistive wire type); power supplies (any device supplying electrical energy either alternating or of the direct current nature); probes (instruments for interconnection or testing); patch cord (for interconnection of electrical or electronic equipment); printed circuits (complete electronic circuits etched chemically into a copper clad circuit board); regulators (for the regulation of current or voltage in a circuit); relays (electro mechanical switches); resistors (electronic devices required to control current flow in electronic circuits); screws (for electro mechanical mounting); shunts (as required in meter movements); sockets (to support electronic components such as integrated circuits, etc.); solder (for the connecting of elements by the application of heat); soldering irons and accessories (as required in the electronic/electrical trade as tools of the trade); spacers (as required in the electronics trade); spaghetti (trade term for insulating tubing used on wire splices); splitters (for dividing incoming television signals for use at several outlets); strain reliefs (as required on power cord installations to protect cord from being torn from chassis); suppressors (for electronics noise suppression); switches and switch hardware (all types such as toggle, push button, mercury, printed circuit, dip and thermal); security systems (to include automotive home and industrial security systems of the hard wire type electrical eye type ultrasonic or RF transmission type); semiconductors (to include all families of semis such as diodes, integrated circuits, optical devices, field effect devices, LED devices, liquid crystal devices, etc.); insulating electrical tape (fabric and polyvinal types); terminals (for wire terminating); test equipment (as related to the electronics, electrical and mechanical industry); thermistors (temperature sensitive, resistive components); tie straps (for binding cable bundles); tools (to include all hand tools that would be found in the electrical, electronic or electro mechanical industry); transformers (of the wire wound variety as required in electrical/electronic circuitry); telephone accessories (to add or delete phones to an existing system (cords, plugs, jacks, adaptors); wire (as found in the electrical/electronics industry).

Publication.

Instruments ophtalmologiques; appareils pour tests ophtalmologiques; instruments de diagnostic en ophtalmologie; appareils d'imagerie médicale à usage ophtalmologique; tomographes et angiographes à usage ophtalmologique; ophtalmoscopes; kératomètres; ophtalmomètres; pupillomètres; pupillomètres à reflets cornéens; phoroptères [appareils pour tests ophtalmologiques]; frontofocomètres [instruments ophtalmiques]; frontofocomètres [instruments ophtalmiques] avec projection; réfractionomètres de l'angle vertical [instruments d'optométrie]; appareils pour examens de la vue; appareils de dépistage des défauts et troubles de la vue; appareils de mesure et de test de l'acuité visuelle et de la vision [appareils pour tests ophtalmologiques]; appareils et instruments ophtalmologiques pour la pratique de tests de lecture et d'acuité visuelle, y compris échelles de lecture; appareils et instruments d'examen de la vision, en particulier pour l'examen du comportement visuel; appareils et instruments à usage ophtalmologique pour détecter et mesurer les mouvements des yeux et de la tête en réponse à des stimuli visuels; pièces et parties constitutives pour tous les produits précités, à savoir appui-front, mentonnières et supports pour appuyer le nez; séparateurs et caches amovibles pour appareils pour tests ophtalmologiques.

Shirts, Trousers, Skirts, Shorts, Jackets, Blouses, Belts, Shoes, Caps, Socks

Fast food, fast casual eat in and take out proprietary designed restaurant selling barbecued, smoked, grilled, charcoal broiled and deep-fried meats, poultry & seafood prepared and cooked with proprietary recipes and procedures namely, brisket, beef back ribs, beef short ribs, lamb and veal, chicken, chicken wings, turkey, turkey legs, hamburgers, fish, assortment of salads, french fries, corn bread and desserts, specialty espresso based beverages and non-alcoholic beverages wrapped in proprietary branded packaging, and proprietary apparel merchandise namely, shirts, t-shirts, sweat-shirts, hoodies, visors, ballcaps, suspenders and jackets.

Aids for golf training, namely, golf clubs, golf balls, golf gloves, golf bags, and non-motorized golf trolleys; Golf swing training devices in the nature of bracelets worn on the body for athletic training purposes that provide instant sensory stimuli biofeedback of golf swing flaws and faults; Golf swing training devices in the nature golf gloves worn on the body for athletic training purposes that provide instant sensory stimuli biofeedback of golf swing flaws and faults; golf training apparatus, namely, golf practice platforms sold together as a unit with wrist braces containing sensors for giving sensory feedback on golf swings and athletic performance; devices for adjusting golf swing for sport use, namely, hand and wrist braces with embedded software systems for analyzing golf swings including such system making use of artificial intelligence (AI), and embedded sensors for sensing movement of the golfer and golf swings and orientation of the wrist in 3D space; golf training aids in the nature of athletic training waistbands with embedded sensors for sensing the movement and orientation of the hips in 3D space; golf training aids in the nature of hand and wrist braces containing embedded body stimulation sensors for conveying electrical, mechanical, auditory, visual, and/or vibratory feedback stimuli about the user's golf swing and body positioning, for nonmedical purposes.